Farm Duty
These motors are designed for many of the varied applications found on the farm. Designs include motors suitable for aeration fans, auger drives, grain stirring, metering pumps, instant reversing, irrigation tower drives, and crop driers. General purpose motors are also available in both single and three phase, TEFC and ODP construction. For those loads that are hard to start and require extra torque, Baldor is the only motor manufacturer that stocks Repulsion-Start Induction Run motors, in sizes from 2 HP to 10 HP.

General Purpose
Baldor's extensive line of General Purpose motors are available in Open Drip-proof and TEFC construction in both single and three phase. Horsepower sizes available from stock range from 1/12 HP through 1500 HP. Designed for "general purpose" use means that these motors can be used in applications which include compressors, pumps, fans, conveyors, material handling, machine tools and many others. Also available are stock motors that are direct replacements for the motors built in Pre-1952 NEMA frames.

Severe Duty
Severe Duty motors are available from 1 HP to 500 HP. These products are especially designed for those applications requiring protection of the motors from severe environmental operating conditions. A few typical applications which might require these types of motors include petro-chemical plants, mines, foundries, pulp and paper plants, waste management facilities, rock crushers, and chemical plants.

HVAC
Baldor's line of Heating, Ventilation, and Air Conditioning Motors are designed with dynamically balanced rotors for reduced vibration and quiet operation. The motors range in size from 1/4 HP to 75 HP and include heavy duty industrial designs as well as designs for commercial applications. These applications include ventilators, direct drive and belted fans, exhaust fans, unit heaters, air conditioning units, and commercial refrigeration condensers. Also included are motors designed especially for use with variable torque electronic controls that are used to conserve electricity.

Inverter Duty
Inverter Drive Motors are wound with 200 degree C. moisture resistant ISR (Inverter Spike Resistant) magnet wire which dramatically extends the life of the motors compared to motors wound with non-ISR wire. The motors available from stock range in size from 1/3 HP to 500 HP. These motors are designed for applications where up to a 1000:1 constant torque speed range is required. Applications include conveyors, pumps, fans, metal processing, compressors, test stands, and material handling equipment.

Metric
Baldor's line of Metric Dimension Motors are designed in IEC Frames from D63 through D200L. The motors are available from stock in 50 Hz or 60 Hz. This means that replacement 60 Hz motors are readily available from Baldor to replace metric motors that have failed on imported machinery. Motor construction meets IP54 and includes motors with B3 base mounting, B5 Flange mounting, or B14 Face mounting. Stock motors range in size from .18 kW to 30 kW. Typical applications for this product include pumps, fans, conveyors, machine tools, gear reducers and any other jobs that requires IEC Frames.

Page 2 of 4 :::: First | Prev | 1 [2] 3 4 | Next | Last :::: Total 4 Page

Home | About Us | Products | Support | Enquiry | Sales Contact | Sitemap

Copyright hold by EXCLUSIVE MASTER (M) SDN BHD