The linear brushless AC Cog-free servo motor consists of a stationary magnet track and a moving coil assembly. The U-shaped, multi-pole magnet track is comprised of alternating polarity rare-earth magnets bonded to a hardchrome plated, cold-rolled steel plate. Modular track assemblies stack end to end to provide the length of stroke required. The coil assembly must be centered within the U-shaped magnet track and guided by customer supplied bearings. Individual coil assemblies can be mounted in series (as a single unit) to increase force. Multiple coil assemblies having independent operation and overlapping trajectories can also be mounted on a single
magnet track.

• Peak forces to 2300 N [517 Lbs]
• High acceleration to 98m/s2 [10g’s]
• High speeds to 5m/s [200 in/sec] with encoder resolution > 1micron
• Speeds to 2.5 m/s [100 in/sec] with encoder resolutions <= 1 micron
• High accuracy 2.5µm/300m [±0.0001 in/ft] (encoder dependent)
• High repeatability 1µm [0.00004 in] (encoder dependent)
• Unlimited stroke length
• Independent multiple coil operation with overlapping trajectories
• No metal-to-metal contact, virtually maintenance free
• Modular magnet tracks for ready shipment
• Use with: Trapezoidal or sinusoidal 3-phase brushless control (refer to Baldor AC drives Flex/Flex+ Series).

• Download LIMOS - The Linear Motor Sizing Software
• Download linear motor sizing document