Enclosed stages can be stacked on top of each other to provide a multiple axis positioning system. Typically, the wider unit is used as the base axis for stability and stages with smaller cross sections stacked on top.

• High forces to 3,204 N [720 Lbs.] with Linear Brushless Iron Core motors
• High acceleration to 44 m/s2 [4.5 g¡¯s]
• High speeds to 5 m/s [200 in/sec] with encoder resolution > 1 micron
• Heavy payloads to 227 kg [500 Lbs.]
• Strokes to 2.44 m [96 in].
• Available in three different widths: 203 mm [8 in] wide and for maximum stability the 305 mm [12 in] and 355 mm [14 in] wide model, which can be used as the base axis in multiple axis applications
• Single-axis stage with linear motor, linear bearings, linear encoder, limit switches, cable carrier, and bellows
• Available with brushless iron core linear motors, cog-free brushless linear motors, brush linear motors, and AC induction linear motors
• Brushless motor for high reliability and low maintenance
• Linear encoder feedback
• High stiffness linear recirculating bearings
• Highest load capacity of all the positioning stages with multiple bearings
• Multiple moving tables with independent operation
• For vertical applications, an optional constant force spring counteracts gravity
• Failsafe braking with optional spring loaded pneumatic cylinder for vertical applications
• Spring loaded hard stops
• Base and table made of aluminum as standard - steel optional
• Use with Trapezoidal or sinusoidal 3 phase brushless control and single-axis motion controller to close the position loop.