Baldor Motion Control - NextMove ESB-2

Product

Quick LinkS

Stats

3000 products online

200 Brands

200 pending

Product Name: NextMove ESB-2

Product Category: Motion Controller

NextMove ESB-2 a compact panel mount motion controller for the control of up to 8 axes - 4 servo, 4 open loop stepper. Using the latest generation 32-bit Digital Signal Processor (DSP) and Field Programmable Gate Array (FPGA), NextMove ESB-2, coupled with MintMT, offers a high speed and flexible motion controller. On board I/O can be used to control many parts of the machine. This can be further expanded with CANopen devices conforming to the standard DS401 I/O profile.

Versatile programming is provided by means of Mint - multitasking BASIC, embedded 'C' or the supplied ActiveX components.

NextMove ESB-2 is available with a RS232 (RS485 optional) and USB port. It is available with 3 servo axes of control or 4 servo axes of control.

Click here for an overview of Baldor's full line of Servo / Motion solutions

Features:

2-bit 120MHz Digital Signal Processor
1MByte SRAM for user programs and data
1MByte FLASH for firmware and user program storage
32kByte FRAM for non-volatile parameter storage
Product variants available for 3 or 4 axes of servo control and 4 axes of stepper control (FlexDrive or MicroFlex can be used in step and direction mode for additional 'open loop' servo axes)
20 uncommitted PNP/NPN opto-isolated digital inputs
Programmable for hardware limits, home input, stop input and error input. 4 of the inputs can be programmed for high speed capture of position with 1 microsecond
12 uncommitted PNP opto-isolated digital outputs
Programmable for drive enable and high speed position compare output
24V/150mA relay output to signal system error conditions
2 x 12-bit uncommitted analog inputs
Uncommitted 12-bit analog output for 3 axis variant
Two auxiliary encoder interfaces for position following or position verification with 3-axis servo variant. One additional auxiliary encoder interface for 4-axis servo variant
RS232 (115,200 Baud) and USB programming interfaces (optional RS485)
USB drivers compatible with Windows 2000/XP
CAN interface for I/O expansion and HMI interfaces. Can be used to provide full peer-to-peer networking capabilities with other Mint based controllers
RoHS compliant
Multi-tasking programming capability with MintMT. Number of tasks limited only by available memory
Comprehensive move types including: linear, circular and helical interpolation; software cams; flying shears; splines; synchronization with positional offsets and virtual axes
Embedded 'C' programming capability (Note: requires purchase of appropriate Texas Instruments compiler)
ActiveX libraries supplied free of charge
Compatible with MintNC and HPGL

Ordering Information and Accessories:

Catalog Number

Description

NSB202-501	NextMove ESB motion controller. 3 axes servo, 4 axes stepper. RS232 and USB serial interfaces
NSB202-502	NextMove ESB motion controller. 3 axes servo, 4 axes stepper. RS485 and USB serial interfaces
NSB203-501	NextMove ESB motion controller. 3 axes servo, 4 axes stepper. RS232 and USB serial interfaces. For use with Baldor DSMS Stepper Motors
NSB203-502	NextMove ESB motion controller. 3 axes servo, 4 axes stepper. RS485 and USB serial interfaces. For use with Baldor DSMS Stepper Motors
NSB204-501	NextMove ESB motion controller. 4 axes servo, 4 axes stepper. RS232 and USB serial interfaces
NSB204-502	NextMove ESB motion controller. 4 axes servo, 4 axes stepper. RS485 and USB serial interfaces
NSB205-501	NextMove ESB motion controller. 4 axes servo, 4 axes stepper. RS232 and USB serial interfaces. For use with Baldor DSMS Stepper Motors
NSB205-502	NextMove ESB motion controller. 4 axes servo, 4 axes stepper. RS485 and USB serial interfaces. For use with Baldor DSMS Stepper Motors
CBL001-501	2m (6ft) RS232 cable for programming and diagnostics (note: 2m (6ft) USB cable included with NSB002-501)
KPD-KG420-20	HMI - 4x20 character/graphic display with serial interface
KPD-KG420-30	HMI - 4x20 character/graphic display with keypad. Serial interface
KPD-KG840-10	HMI - 8x40 character/graphic display with numeric keypad and serial interface
KPD-TS03M-10	HMI - 3.9 " monochrome touch screen with serial interface
KPD-TS05M-10	HMI - 5.6" monochrome touch screen with serial interface
KPD-TS05C-10	HMI - 5.6" color touch screen with serial interface
KPD-TS12C-10	HMI - 12.1" color TFT touch screen with serial interface
KPD-OPTC	CANopen option card for HMI panels
CBL034-501	RS232 programming cable (PC to HMI)
OPT029-502	CAN 24 input, 24 output expansion module (see note 1).
OPT029-501	4 way encoder splitter board
OPT029-502	8 way encoder splitter board
MNC001-501	MintNC - Windows profiling front end for NextMove which accepts industry standard files: HPGL, DXF and G-code.
24V Power Supplies
DR-75-24	75W (3.2A) 24VDC power supply
DR-120-24	120W (5A) 24VDC power supply
DRP-240-24	240W (10) 24VDC power supply

We also deal with other Baldor Product, Visit http://www.baldor.com or Contact us for professional total solution.